Morse Code Translator (Sound, Flashing Light & Korean Morse)

Translate text to Morse code and Morse back to text with automatic detection. Play it as sound, light or vibration, tap out your own code, and browse the English and Korean Morse charts.

Examples
Result

...---...

Tap to key in Morse

A short press is a dot, a long press a dash. Pause briefly to end a letter, longer to end a word. The space bar works too.

Morse code chart

Letters

Numbers

Korean consonants

Korean vowels

Punctuation

Tap a cell to hear it. In Korean Morse, double consonants are sent twice (ㄲ = ㄱㄱ) and compound vowels are split (ㅘ = ㅗㅏ).

How to use it

  1. Type text or paste Morse code. Input made only of dots, dashes, spaces and slashes is read as Morse and decoded; anything else is encoded. A label above the box shows which way it is going.
  2. Separate letters with one space and words with /. Symbols like · and − are understood too.
  3. Press Play to hear the code while the signal lamp flashes and the current letter lights up. On phones you can feel it as vibration. Adjust speed (WPM) and pitch with the sliders.
  4. Use Tap to key in Morse to send your own code: a short press is a dot, a long press a dash. Pause to finish a letter, pause longer to finish a word — it decodes as you go.

Timing and speed

International Morse uses fixed proportions: dot 1 unit, dash 3, gap inside a letter 1, between letters 3, between words 7. One unit is 1200 ÷ WPM milliseconds, so 80 ms at 15 WPM. SOS (... --- ...) is 5 + 3 + 11 + 3 + 5 = 27 units — about 2.2 seconds at 15 WPM. Learners usually start around 10–13 WPM with clear spacing; tap any cell in the chart to hear that character on its own.

Korean Morse code

Korean has its own code for the Hangul letters: 14 consonants, 10 vowels plus ㅐ and ㅔ. Syllables are broken into letters and each letter is sent separately, so 안녕하세요 ("hello") becomes twelve codes: -.- . ..-. ..-. ... -.- .--- . --. -.-- -.- -.. Double consonants are sent twice (ㄲ = ㄱㄱ) and compound vowels are split (ㅘ = ㅗㅏ). Because Morse has no syllable breaks, the decoder regroups letters into syllables using rules tuned for common words.

English or Korean?

The same dots and dashes mean different things in each alphabet: ... --- ... is SOS in English but nonsense in Korean. The translator decodes both ways, picks the reading that makes sense, and shows the other one underneath. You can also lock it to English or Korean.

Punctuation and unsupported characters

Letters, numbers and common punctuation (. , ? ' ! / ( ) & : ; = + - _ " $ @) are supported. Characters without a Morse code, such as emoji, are skipped and listed so you know what was left out; unknown codes in decoded text are shown as □.